This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.
MovingLight is a moveable NeoPixel LED light with two stepper motors and is controlled via Bluetooth and Blynk app.
Human detection Security System Using IOT
Many IoT based Home Automation projects crashes when the Internet speed goes down. So, within this project, I tried to solve this issue.
Turn a light on/off using a relay, Blynk, and an IR Break Beam.
Make use of Samsung Gear Blynk widget to control LED strip that can light up your room. Thanks to HARDWARIO IoT kit it's easy to make.
In this activity, we will be reading and displaying the water flow meter on blynk using NodeMCU and also control the tap with the solenoid.
This tutorial is about making a temperature and humidity wifi node with Blynk.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
LCD Display and LoT Blynk App of Temperature, Humidity and Smoke Sensors
How To make Simple Home Automation System
It is a lamp or desk lamp that is controlled by your phone for when you need the light to get to your bed, but not once you are in bed.
Too lazy to get off the couch? "Alexa, turn on the lights."
Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
Hii Friends Today I'll Show You How To Make Simple DIY Eclipse Wall Light Using ESP8266 SO LET'S Make It🔥
Have you ever dreamed to turn on or off your Christmas tree lights with just your voice? if the answer is "yes", just read this article.
With this project you can play any sound from your SD card on your audio system. Only wire you will need is 3.5mm jack.
The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation / IoT project
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
My colleague crashed the roof of his car by leaving the garage to early. So I promised him red, amber, green lights in the garage.
Create a beautiful home lamp that looks great and also is smart and customizable with HARDWARIO IoT Kit. It is really easy to make.