If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
Control your home applications using a mobile phone.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
How to make your room intelligent easily.
This guide shows you how to add Blynk Board support to the Arduino IDE.
The aim of this project is to control and monitor our home appliances through the internet from anywhere in the world.
Learn how to use the Blynk app to automate your house.
Learn how to use Blynk app with an ESP8266.
I created a house with a light that gradually turns on a light if it is dark and an alarm connected to the door.
The best way to save electricity from using your light bulbs is to open your blinds and let the sun shine through!
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
An automatic pellet dispenser designed to feed your dog or cat without lifting a finger
Turn a light on/off using a relay, Blynk, and an IR Break Beam.
Take care of your plant with automatic watering.
Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.
It is a lamp or desk lamp that is controlled by your phone for when you need the light to get to your bed, but not once you are in bed.
MovingLight is a moveable NeoPixel LED light with two stepper motors and is controlled via Bluetooth and Blynk app.
Too lazy to get off the couch? "Alexa, turn on the lights."
Control an on-board LED.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation / IoT project
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.