Remotely we control our home with MKR1000 and IOT of Blynk. We can manage the boiler, the 'anti-theft irrigation, open the Automatic Gate.
Collecting multiple data from multiple sensors connected to the same 1-wire bus and monitoring them from the internet with Blynk.
Waterman is a device in form of a box which will check the contamination level of water and also the availability of water in the pipeline.
How to (and not to) build your own home automation system.
Converting a common RC car to a Bluetooth car, using an Arduino 101 & controlling with a smartphone via Blynk app.
Control your home applications using Google Assistant.
Very reliable (multiple mice-live catch) mouse trap. Mice *cannot* escape if they trigger the IR beam! **NEW*: IoT version with phone app!
IoT-based project to control an indoor garden, monitor them remotely, and use the data for future analysis.
A home automation project for light use with an ESP8266 and 5V relay.
In this opportunity we will integrate our active power meter or electric consumption, Peacefair Pzem-004 with the IoT Blynk app platform
In this I show you how to control LEDs using Blynk app In IoT platform.
ADITI is a connected bodysuit heating enabled incubator for preterm infants measuring ECG, Heart Rate, SpO2, Temp & Respiration comfortably.
Be the master, control everything with your smart phone.
Fidget Spinners are everywhere - one of the challenges is to get the fastest spinning and longest running Spinner...build a sensor!
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
Automate your curtains and add safety to your room, using the Arduino 101, WIZ750SR and Blynk, along with sensors and actuators!
In this simple tutorial, we will explore how to control a servo motor over the internet, using a smartphone.
Getting started with Blynk Bridge - the simplest method to communicate between ESP8266, Arduino or Raspberry Pi.
How to control Hubsan X4 from Android or iOS, easily!
Let's make a little portable IoT weather station for under $20 using Arduino and the Blynk library!
Use the Ionic framework to build an app that can control your hardware or hit any REST API.
With this tutorial, we will learn how to handle this fantastic little device, the NodeMCU ESP-12E and Blynk platform.
An outdoor rover, capable of autonomous navigation (using GPS and sonar sensors) or controlled over WiFi.
A simple Power Meter you can use to measure 0-26V & up to 3.2A. Add to any project to monitor voltage, current, power and energy used.