Easy way to unlock and Lock door with Blynk app. Also, I will add code for to Lock & Unlock door by RFID and fingerprint sensor. 3 in 1.
Feed your pets remotely or on a schedule using the idIoTware Shield.
In Manual Mode, control the relay module from Touch Switch & Blynk App. In Auto Mode, DHT11 & LDR will control the Relays Automatically.
Adapt your home automation project from our March 2017 workshop to be controlled through BLE using the Blynk app on your phone.
Get an extractor fan to automatically turn on when the humidity in the bathroom exceeded a certain level and then turn off again.
Ever wanted your whole room to be lit in sync with the music? Or to be able to control it with your voice? Then this might be for you!
Blynk app allows selection of a desired temperature. A space heater turns on once actual temperature drops below desired temperature.
A system that keeps you updated about the happenings of your house in your absence.The display is shown on your mobile.
Too lazy to get off the couch? "Alexa, turn on the lights."
Have you ever dreamed to turn on or off your Christmas tree lights with just your voice? if the answer is "yes", just read this article.
Garage Door IOT Monitor and Controller, using Blynk App on your cell phone. Also OTA updates and MQTT to Home Assistant.
Luminous ball, with clock and thermometer, controlled by Blynk.
Gutters to Gardens is a solar powered rain barrel for remotely or automatically activating a water distribution system for home garden beds.
Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
Tired of manually moving your movies and TV shows between devices? now you don't have to!
Concerned about IoT privacy on the cloud? Blynk offers an interesting option for improved security with a local server.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
In this I show you how to control LEDs using Blynk app In IoT platform.
Control 5 home appliances from the manual switches, smartphone, IR remote. Also, control relays with room temperature and ambient light.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
Control an on-board LED.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
LM35 data or temperature can be shown on phone from anywhere. An Example of how can we read data through the virtual pin.
The Waternator 293 is a simple device that regulates the water level in your Christmas tree base.