This car can be controlled with your mobile via bluetooth module. And can extinguish fire. And arm for controlling the direction of water pipe
Build thermostats, monitor sump pumps, water leaks, temperature, and pools. Let's see what we can do with Particle Mesh at home.
In this IoT project, I have made a WiFi and IR remote control relay module using an ESP8266 (ESP01) and Arduino with Real-time Feedback.
How To make Simple Home Automation System
It is possible that ultraviolet rays emitted by the sun deactivate the virus in a few seconds. The Beach UV meter measures UV and tweets.
Have your eggs always perfectly boiled just as you like them. With this solution that is simple and customizable.
Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen
Make an affordable but smart Alarm system for your home, or any of your buildings. It can run up to 2 years just from batteries.
Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
Control your heating with this simple device that is easy to modify. You can control your sunblinds or boiler for optimal temperature.
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
With this project you can play any sound from your SD card on your audio system. Only wire you will need is 3.5mm jack.
Make use of Samsung Gear Blynk widget to control LED strip that can light up your room. Thanks to HARDWARIO IoT kit it's easy to make.
Create a beautiful home lamp that looks great and also is smart and customizable with HARDWARIO IoT Kit. It is really easy to make.
Simple and easy build of Arpeture MC Mini at a fraction of cost!
Hii Friends Today I'll Show You How To Make Simple DIY Arc Reactor Using WemosD1 SO LET'S Make It🔥
Hii Friends Today I'll Show You How To Make Simple DIY Eclipse Wall Light Using ESP8266 SO LET'S Make It🔥
In this easy project we'll connect a temperature and humidity sensor to an Arduino Uno with an Ethernet Shield and we'll use Blynk.
In this tutorial, I am going to show you how to read multiple analog values using only one analog input pin.
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
This project aimed at designing and fabricating a highly reliable, user-friendly device.