A system that keeps you updated about the happenings of your house in your absence.The display is shown on your mobile.
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
Learn how to use the Blynk app to automate your house.
Learn how to use Blynk app with an ESP8266.
Get notified on your smartphone/smartwatch when your mail is delivered and when it is collected. New version.
This is a simple project for those who want to make a relay module using one BC547 transistor.
A home automation project for light use with an ESP8266 and 5V relay.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
Tired of manually moving your movies and TV shows between devices? now you don't have to!
Easy way to unlock and Lock door with Blynk app. Also, I will add code for to Lock & Unlock door by RFID and fingerprint sensor. 3 in 1.
Build a home automation system with a Blynk user interface, an alarm system, dimmable lights, timers, and remote controlled appliances.
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
In this I show you how to control LEDs using Blynk app In IoT platform.
Get an extractor fan to automatically turn on when the humidity in the bathroom exceeded a certain level and then turn off again.
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
The Waternator 293 is a simple device that regulates the water level in your Christmas tree base.
Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.
Control home appliances over internet. This IOT project done using Node MCU ESP8266 and BLYNK app. Control devices from anywhere.
This NeoPixel LED light has six different light settings, is connected to the Wi-Fi and controlled via Particle Photon and Blynk app.
Too lazy to walk and turn something on Want to cheaply control your home power usage while out Well here's a button (and app) to solve it!
An automatic pellet dispenser designed to feed your dog or cat without lifting a finger
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
Adjust your blinds from the comfort of your seat without having to go through the effort of standing up.