This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
Simple GPS tracker using a Particle Photon (or Electron) and an EM406 GPS module with location visible on Blynk app map.
This NeoPixel LED light has six different light settings, is connected to the Wi-Fi and controlled via Particle Photon and Blynk app.
Making a smart garage model from the toy building using XOD and Blynk.
A system that allows you to detect movement, send alert through your smartphone and turn on and off the lights of your home over internet!
Use a Mi Band 2/3 to switch ON/OFF devices like fan, light or anything else that comes to your mind.
An IoT device that could help keep the Sandy River Delta clean, as garbage is a very common problem.
ADITI is a connected bodysuit heating enabled incubator for preterm infants measuring ECG, Heart Rate, SpO2, Temp & Respiration comfortably.
Automate your curtains and add safety to your room, using the Arduino 101, WIZ750SR and Blynk, along with sensors and actuators!
Let's make a little portable IoT weather station for under $20 using Arduino and the Blynk library!
I've made a few smoker controllers in the past and monitoring tools to go with them.
Know when your clothes are dry
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!
Make a simplified table trash bin and can.
We will learn how to capture temperature data, upload it to internet with a NodeMCU and monitor it on a Smart device using a Blynk app.
Cost effective and highly reliable industrial automation solution using the power of Arduino.
This is a very simple project, were the main idea is to explore how to control servos via internet using NodeMCU and Blynk.
This system sends alerts to your smartphone when there is movement in the house, also allows monitoring the temperature of the place.
A home automation project for light use with an ESP8266 and 5V relay.
If an accident or any gas or smoke leakage is detected, it notifies through call and through Blynk app.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
7 IoT platforms (Yeelink, Wechat, ThingSpeak, Temboo, Blynk, DeviceHub and IFTTT) with Arduino Yun to control home appliance
A simple Power Meter you can use to measure 0-26V & up to 3.2A. Add to any project to monitor voltage, current, power and energy used.
A method in which waste management is automated. An innovative system that will help keep the city clean and healthy.