This tutorial shows how to flash firmware on the ESP8266-01. Also how to connect the ESP8266-01/Arduino to Blynk.
Check in on a loved one instantly and have fun!
An outdoor rover, capable of autonomous navigation (using GPS and sonar sensors) or controlled over WiFi.
An IoT device that could help keep the Sandy River Delta clean, as garbage is a very common problem.
Simply click a button to receive your phone's geolocation.
ADITI is a connected bodysuit heating enabled incubator for preterm infants measuring ECG, Heart Rate, SpO2, Temp & Respiration comfortably.
How to control Hubsan X4 from Android or iOS, easily!
Automating a chicken coop with sensors and actors, using an Arduino MKR1000 and the Blynk internet dashboard.
Save time by knowing whether the Faculty is in his chamber or not.
Use a $9 GSM module & the Hologram network to remotely control any Arduino with Blynk App.
Cost effective and highly reliable industrial automation solution using the power of Arduino.
Here is how to make an Arduino/Genuino 101 Bluetooth Low Energy thermometer with TMP102 and Blynk.
Control your home applications using Google Assistant.
This project brings a pre-IoT audio receiver up to speed using Blynk and a TI Launchpad to send IR signals through WiFi from an iPhone.
A system that allows you to detect movement, send alert through your smartphone and turn on and off the lights of your home over internet!
Analyse concrete, metal, wood structures for bends and angles and alerts if they have deviated from the original position.
My aim is to minimize the loss of electricity there is when people forget to switch off their fans or lights, through smart home solution.
Know when your clothes are dry
7 IoT platforms (Yeelink, Wechat, ThingSpeak, Temboo, Blynk, DeviceHub and IFTTT) with Arduino Yun to control home appliance
Simplest wifi car controlled by your smartphone using NodeMcu esp8266 and Blynk.
saving water smartly.
Turn your plain light switch into an internet connected luxury item that will wow your friends and family.
Create a shield of control with multiple sensors to create visual and sound notifications in case of danger.
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!