Flashy LED decor lights that respond to your bike's motion.
Read sensor data and toggle LEDs with the Blynk mobile app and the TI CC3200 LaunchPad
Display sensor values (DHT11 in example) on the Smartphone using Blynk App.
An IoT device that could help keep the Sandy River Delta clean, as garbage is a very common problem.
Control 5 home appliances from the manual switches, smartphone, IR remote. Also, control relays with room temperature and ambient light.
7 IoT platforms (Yeelink, Wechat, ThingSpeak, Temboo, Blynk, DeviceHub and IFTTT) with Arduino Yun to control home appliance
How to merge different IoT devices and services? Node-RED provides an elegant solution.
A simple Power Meter you can use to measure 0-26V & up to 3.2A. Add to any project to monitor voltage, current, power and energy used.
In this simple tutorial, we will explore how to control a servo motor over the internet, using a smartphone.
This system identifies footballer's skills, performance & moves that are difficult to identify during play or training.
Mars Rover that uses Arduino 101 for brains, BLE for communication, and the Blynk app for remote control.
ADITI is a connected bodysuit heating enabled incubator for preterm infants measuring ECG, Heart Rate, SpO2, Temp & Respiration comfortably.
Very reliable (multiple mice-live catch) mouse trap. Mice *cannot* escape if they trigger the IR beam! **NEW*: IoT version with phone app!
Let's make a little portable IoT weather station for under $20 using Arduino and the Blynk library!
A four-legged robot on roller skates.
An outdoor rover, capable of autonomous navigation (using GPS and sonar sensors) or controlled over WiFi.
Automate your curtains and add safety to your room, using the Arduino 101, WIZ750SR and Blynk, along with sensors and actuators!
An opensource 3D printed aquarium controller with IOT capabilities.
This is a short tutorial for connecting and setting up the MH-Z14A carbon dioxide sensor in Arduino w/OTA updates and Blynk.
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
In this tutorial, I am going to show you how to read multiple analog values using only one analog input pin.
With this tutorial, we will learn how to handle this fantastic little device, the NodeMCU ESP-12E and Blynk platform.
Make a simplified table trash bin and can.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
