50 people and 6 robots sumo at IoT meetup.
This project is a wireless drone that can be controlled using the Blynk app on your phone. It has an autonomous mode that avoids objects.
This health band can assist old people in their daily lives, leaving the family stress free!
Here is how to make an Arduino/Genuino 101 Bluetooth Low Energy thermometer with TMP102 and Blynk.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
Protect your valuables with a puzzle!
Control your garage door from wherever you are.
How can scientists model and predict the formation of sink holes using IoT?
Waterman is a device in form of a box which will check the contamination level of water and also the availability of water in the pipeline.
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
If an accident or any gas or smoke leakage is detected, it notifies through call and through Blynk app.
Automating a chicken coop with sensors and actors, using an Arduino MKR1000 and the Blynk internet dashboard.
Control an on-board LED.
A method in which waste management is automated. An innovative system that will help keep the city clean and healthy
The aim of this project is to control and monitor our home appliances through the internet from anywhere in the world.
Solar installation with lithium battery packs monitoring.
Build thermostats, monitor sump pumps, water leaks, temperature, and pools. Let's see what we can do with Particle Mesh at home.
A simple Power Meter you can use to measure 0-26V & up to 3.2A. Add to any project to monitor voltage, current, power and energy used.
Getting started with Blynk Bridge - the simplest method to communicate between ESP8266, Arduino or Raspberry Pi.
Use your Android/IoS phone or tablet to control your hardware remotely with the thingSoC ESP32 board.
There are many uses for servos now-a-days! There are even more uses for WiFi servos!
This tutorial shows how to flash firmware on the ESP8266-01. Also how to connect the ESP8266-01/Arduino to Blynk.
Be the master, control everything with your smart phone.
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!