Display information or variables on a LCD available at BLYNK app using IOT.
Monitor pressure, humidity, and temperature over WiFi with an AA battery-sized device.
This tutorial will help you to learn DHT11/DHT22 interfacing with nodeMCU and sending its data to Blynk Application.
Adjust your blinds from the comfort of your seat without having to go through the effort of standing up.
LM35 data or temperature can be shown on phone from anywhere. An Example of how can we read data through the virtual pin.
Today i show you how to interface DHT sensor Value in Blynk Apps use NodeMcu8266 .
In this project 2 Particle Photon's were used to control an RC Car in real time with the Internet of Things.
A smartphone garage door remote and status sensor using Blynk and Photon.
Water is essential for life. Save water is saving Earth. So, why not use Blynk Board to save Earth?
This WiFi module makes it convenient for the user to switch between two audio sources without the need to swap and insert the audio cables.
A simple Internet of Things experiment, using an Arduino MKR1000 board to control two LEDs and monitor a potentiometer, via Blynk app.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
Protect your valuables with a puzzle!
Control your home applications using Amazon Alexa.
With this project, we will be able to water our plant automatically and monitor it from our smartphone.
An economic FM radio with WiFi connectivity incorporating cloud and IoT practices.
A solution to measure noise level and sound pollution in urban areas.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
This product is designed to monitoring the quality of air continuously for COPD patient.
Here's IoT project (Internet of Things) data monitor, without any Ethernet shield, ESP module or IoT board.
In this project, I am going to demonstrate how you can turn on/off LED on idIoTware shield with the help of Blynk app.
A new way to connect sensors! Connect up to five sensors to the particle powered WiSor and obtain real-time data on your mobile phone!
A system for the blind which helps them walk through the street, as and also monitors their location and sends an SOS on button press.