Turn a light on/off using a relay, Blynk, and an IR Break Beam.
Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
MovingLight is a moveable NeoPixel LED light with two stepper motors and is controlled via Bluetooth and Blynk app.
It is a lamp or desk lamp that is controlled by your phone for when you need the light to get to your bed, but not once you are in bed.
Control an on-board LED.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation / IoT project
By using your phone you can make is so that you can change your temperature of your old stick thermostat from anywhere.
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
Create a beautiful home lamp that looks great and also is smart and customizable with BigClown kit. It is really easy to make.
This project was part of the Lane Tech HS Physical Computing. This project involves relays, and the app Blynk to control lights.
With this project you can play any sound from your SD card on your audio system. Only wire you will need is 3.5mm jack.