Get notified on your smartphone/smartwatch when your mail is delivered and when it is collected. New version.
Neopixel LEDs are fitted behind the guitar pickups and illuminate with the rhythm of your strumming allowing for a custom and unique design.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
The ARMA IoT Shield is a breakout board for Arduino to make IoT projects quickly.
Blynk app allows selection of a desired temperature. A space heater turns on once actual temperature drops below desired temperature.
GrumpyHedgehog allows you to communicate with signs and movements to send keyboard commands, turn lights on/off, count people in a room...
Gutters to Gardens is a solar powered rain barrel for remotely or automatically activating a water distribution system for home garden beds.
Collect environmental factors and culture amount while producing yogurt. Then, run a neural network model via Blynk to predict its texture.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!
In this project, I am going to demonstrate how you can make your own ON AIR station with the help of the idIoTware shield.
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
Learn how to use Blynk app with an ESP8266.
Make a simplified table trash bin and can.
Save water, save energy and monitor water consumption with a smart faucet.
This is a simple project for those who want to make a relay module using one BC547 transistor.
Create a beautiful home lamp that looks great and also is smart and customizable with HARDWARIO IoT Kit. It is really easy to make.
In this post we will be going to look how to make your own CCTV using ESP32-CAM board. It will be cost lower than CCTV cameras. You can fix
Control 8 relays with WiFI + Bluetooth + Manual Switch using ESP32 and Blynk App. Explained with circuit & source code.
Control 5 home appliances from the manual switches, smartphone, IR remote. Also, control relays with room temperature and ambient light.
Feed your pets remotely or on a schedule using the idIoTware Shield.
How to make IoT based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the manual switch & smartphone.
I spent my last weekend creating an app for my router. System and network charts, stats, notifications, WiFi control, and more!
With this project you can play any sound from your SD card on your audio system. Only wire you will need is 3.5mm jack.
