This tutorial will help you to learn DHT11/DHT22 interfacing with nodeMCU and sending its data to Blynk Application.
How to build a smart monitoring system (temperature, soil moisture, light level, humidity and air pressure sensors) for your plants.
A solution to measure noise level and sound pollution in urban areas.
Automatic and smart care of plants by proper watering and their monitoring.
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
Monitor pressure, humidity, and temperature over WiFi with an AA battery-sized device.
Octopod, a uniquely shaped full automation system that allows you to monitor your industry and keep security with AI and smart RFID locks.
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
A new way to connect sensors! Connect up to five sensors to the particle powered WiSor and obtain real-time data on your mobile phone!
A cube with all the necessary sensors, suitable for a wide range of applications like agriculture. Know the land beneath you!
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
Water is essential for life. Save water is saving Earth. So, why not use Blynk Board to save Earth?
The bird house will be outfitted with IOT to track what kind of conditions attracts guests and will tweet you when they are at the door!
Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.
Create your Blynk mobile app to monitor your garden and activate the irrigation.
Collecting multiple data from multiple sensors connected to the same 1-wire bus and monitoring them from the internet with Blynk.
A project that speaks on behalf of mother nature. It is real time air quality monitoring device.
Fidget Spinners are everywhere - one of the challenges is to get the fastest spinning and longest running Spinner...build a sensor!
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
Use the Arduino101 Bluetooth wireless interface to read the Intertial Measurement Unit (IMU) with your phone or tablet using Blynk !
Smart Garden is a plant environmental monitoring system.
A simple 4 channel design/program for monitoring orchid and plant moisture levels.
Using PSoC and LinkIt ONE send analog sensor values to Blynk and then, with the power of IFTTT control your smart devices based on the data!