This tutorial is about making a Smart Plug with ESP8266 & Blynk for anything you want to turn on or off automatically.
This tutorial is about making a temperature and humidity wifi node with Blynk.
Hi! Everyone. This time I show you on how to control your home appliances using your voice.
This tutorial is about making an automated gate for your driveway for (relatively) cheap with ESP8266, Arduino, and Blynk.
We will learn how to make a fire alarm system using NodeMCUESP8266. This IoT based project detects the nearby flame & informs us.
My colleague crashed the roof of his car by leaving the garage to early. So I promised him red, amber, green lights in the garage.
Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.
You can control your home light or any appliances from anywhere and anyplace
Human detection Security System Using IOT
Through this tutorial I made fire alarm notification System Using Iot technology. wherever you are in the world you can get the notification
The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.
It is a simple project that helpful for the advanced level of farming and irrigation.
Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
In this project, you can view the temperature and humidity in your room wherever you are.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
With this project you can play any sound from your SD card on your audio system. Only wire you will need is 3.5mm jack.
Create a beautiful home lamp that looks great and also is smart and customizable with HARDWARIO IoT Kit. It is really easy to make.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
Make use of Samsung Gear Blynk widget to control LED strip that can light up your room. Thanks to HARDWARIO IoT kit it's easy to make.
Use of a Particle Argon to open/close a garage door with a Particle Xenon used as a mesh limit switch & smartphone control via Blynk app.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
Using Arduino UNO GSM SIM800 SIM network to remotely control any Arduino with Blynk app. Share schematic + gerber file + BomList