Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.
In this project, I am going to demonstrate how you can turn on/off LED on idIoTware shield with the help of Blynk app.
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
Control 8 relays with WiFI + Bluetooth + Manual Switch using ESP32 and Blynk App. Explained with circuit & source code.
Using UIFlow and Blynk to complete the interaction experiment
A garage door and a climate sensor, which is connected to wifi. It sends phone notifications when the door opens or closes.
In this post we will be going to look how to make your own CCTV using ESP32-CAM board. It will be cost lower than CCTV cameras. You can fix
We will learn how to make a fire alarm system using NodeMCUESP8266. This IoT based project detects the nearby flame & informs us.
It is an IOT based door lock system which consists of a NodeMCU board. It is interfaced with a Sg90 which shows open and close of a door lock
Converting a RC car to an IoT car with a Particle Photon and controlling it with the Blynk app.
Simple yet effective
A system for the blind which helps them walk through the street, as and also monitors their location and sends an SOS on button press.
Learn how to use the Blynk app to automate your house.
A new way to connect sensors! Connect up to five sensors to the particle powered WiSor and obtain real-time data on your mobile phone!
Many IoT based Home Automation projects crashes when the Internet speed goes down. So, within this project, I tried to solve this issue.
Hi! Everyone. This time I show you on how to control your home appliances using your voice.
Are you interested in controlling your robotic arm using your phone or computer from anywhere in the world?
If you have ever wondered how to get started in the IoT (Internet of Things) world, this is the tutorial for you!
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
You can control your home light or any appliances from anywhere and anyplace
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
Many projects like this involve requiring a WiFi shield, or a Bluetooth Module. However, thanks to Blynk, all that is still possible.
This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.
In this tutorial, we will learn how to interface Servo motor with the Raspberry pi module and operate it with the Blynk app. and This proje