A simple IoT test using a Blynk project to control & monitor 2 ESP8266 boards (NodeMCU & Wemos D1).

Control your LED on Arduino UNO using Blynk App.

An outdoor rover, capable of autonomous navigation (using GPS and sonar sensors) or controlled over WiFi.

Here's IoT project (Internet of Things) data monitor, without any Ethernet shield, ESP module or IoT board.

A method in which waste management is automated. An innovative system that will help keep the city clean and healthy

An IoT device that could help keep the Sandy River Delta clean, as garbage is a very common problem.

You love daily changing Bible verse? Then the "Die Losungen" are a concept: here they are represented with value added information.

A simple project to display a particular webpage data in blynk app via bluetooth module and using thingspeak platform.

Control and monitor the home environment using Android app with advanced features such as voice command, scheduling, home preparing itself.

This is the next step with an Particle Photon and softAP integration: cucumbers go online.

A project that speaks on behalf of mother nature. It is real time air quality monitoring device.

IoT with your robot at one place and your phone another, both connected via internet.

An internet-connected, servo-driven deadbolt actuator that can be operated remotely using a smartphone.

Checks if humidity threshold is reached and informs the user by using Blynk/IFTTT-services with softAP integration.

Interfacing ultrasonic sensor with NodeMCU and displaying the distance in the Blynk app.

A water-resistant temperature sensor is suitable to signal the reaching of the core temperature of the meat during the grilling time.

Open, close and monitor a garage door opener with a smart phone using a Particle Photon and the Blynk application.

A combination of 3 different clocks in one frame.

I remodeled a stag beetle toy to be controllable with Blynk. I used Adafruit Feather 32u4 Bluefruit LE as the microcontroller.

A simple Power Meter you can use to measure 0-26V & up to 3.2A. Add to any project to monitor voltage, current, power and energy used.

Fidget Spinners are everywhere - one of the challenges is to get the fastest spinning and longest running Spinner...build a sensor!

Controlling a robot via WiFi, using Arduino and Blynk application.

Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.

Use the Arduino101 Bluetooth wireless interface to read the Intertial Measurement Unit (IMU) with your phone or tablet using Blynk !