A home automation and Internet of Things project using Arduino Mega 2560 and ESP32.
This is a project for measuring the AC current of a device plugged into the outlet and data feedback using Blynk with OTA.
Clean your yard from your smartphone or preset a job for AYSE to follow!
In this I show you how to control LEDs using Blynk app In IoT platform.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
Monitor pressure, humidity, and temperature over WiFi with an AA battery-sized device.
Controlling a robot via WiFi, using Arduino and Blynk application.
Control your home applications using Amazon Alexa.
The ARMA IoT Shield is a breakout board for Arduino to make IoT projects quickly.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
Learn how to use Blynk app with an ESP8266.
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
With this project, we will be able to water our plant automatically and monitor it from our smartphone.
To assist the doctors to track their patients during COVID-19
A solution to measure noise level and sound pollution in urban areas.
Use Tracer MPPT (and others) controller's RS485 data link to generate cool statistics live on your phone.
Water is essential for life. Save water is saving Earth. So, why not use Blynk Board to save Earth?
Control your heating with this simple device that is easy to modify. You can control your sunblinds or boiler for optimal temperature.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
An I2C interface with Blynk.