A home automation project for light use with an ESP8266 and 5V relay.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
Clean your yard from your smartphone or preset a job for AYSE to follow!
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.
Remotely we control our home with MKR1000 and IOT of Blynk. We can manage the boiler, the 'anti-theft irrigation, open the Automatic Gate.
Get an extractor fan to automatically turn on when the humidity in the bathroom exceeded a certain level and then turn off again.
In this I show you how to control LEDs using Blynk app In IoT platform.
I made LED EyeBall controlled by Blynk using Adafruit Feather 32u4 Bluefruit LE. I can easily using Blynk!!
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
Get notified on your smartphone/smartwatch when your mail is delivered and when it is collected. New version.
Get water meter data sent to your mobile phone using Wi-Fi. Made with ATtiny85 + ESP8266-01 + Blynk.cc and AA batteries.
Control your Home Lights using the Twitter platform.
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
Neopixel LEDs are fitted behind the guitar pickups and illuminate with the rhythm of your strumming allowing for a custom and unique design.
A home automation and Internet of Things project using Arduino Mega 2560 and ESP32.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
The ARMA IoT Shield is a breakout board for Arduino to make IoT projects quickly.
Blynk app allows selection of a desired temperature. A space heater turns on once actual temperature drops below desired temperature.
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
Create a beautiful home lamp that looks great and also is smart and customizable with HARDWARIO IoT Kit. It is really easy to make.