This turns on a bathroom fan automatically when its humid.
A simple IoT experiment using an ESPectro Core v3 and connecting it to Blynk, Cayenne, Dweet, Freeboard & Thinger.
A simple Internet of Things (IoT) experiment using an ESP32 Development Board & shared access Blynk.
A simple IoT test using a Blynk project to control & monitor 2 ESP8266 boards (NodeMCU & Wemos D1).
Here's IoT project (Internet of Things) data monitor, without any Ethernet shield, ESP module or IoT board.
Open, close and monitor a garage door opener with a smart phone using a Particle Photon and the Blynk application.
Fidget Spinners are everywhere - one of the challenges is to get the fastest spinning and longest running Spinner...build a sensor!
Smart Garden is a plant environmental monitoring system.
This project creates a way to monitor water usage, to reduce water costs.
Have you bought a cheap analog LED strip set in the hardware store? Bring this set with a Particle Photon and a relay to light up!
Self-stabilizing spoon for Parkinson's sufferers who have difficulty eating on their own because of serious tremors.
Check the current conditions: light, temperature, humidity on your smartphone.
The idea is to upgrade my rover to be controlled by a Blynk app in my mobile. The Blynk is talking to my Arduino UNO using Bluetooth HC06.
Particle and Blynk to wirelessly monitor a 4,000 gallon water distribution system.
A simple 4 channel design/program for monitoring orchid and plant moisture levels.
Wanted to replace the standard remote control unit for a garage door with an app on my iPhone.
Getting started with Blynk Bridge - the simplest method to communicate between ESP8266, Arduino or Raspberry Pi.
This is an ESP8266-based Neopixel dashboard: it can show current time, a custom message and have up to 41 preset effects.
50 people and 6 robots sumo at IoT meetup.
An I2C interface with Blynk.
A cool RC Car that you can control with the touch of your fingers right from your own phone.
Control home appliances over internet. This IOT project done using Node MCU ESP8266 and BLYNK app. Control devices from anywhere.
Remotely we control our home with MKR1000 and IOT of Blynk. We can manage the boiler, the 'anti-theft irrigation, open the Automatic Gate.
Create a shield of control with multiple sensors to create visual and sound notifications in case of danger.