Do you want to make led with Blynk but doesn't know how to make it? well i'll help with you with with that
Led With Blynk In Easy Ways
This project is for beginner
Now you can control a LED from your smartphone easily
This Robot cleans floors very efficiently !!:)
Afya Bora is a data driven-electronic medical consultation platform that allows patients to directly connect with healthcare practitioners.
Control your lighting and other appliances from your smartphone using Blynk app and voice control using google assistant IFTT webhook.
How to Read Multiple Analog Values Using One Analog Pin
Used in a coffee roastery as part of a larger system, but can easily be adapted for control needs. A lot of control in a small form factor.
A simple home automation project allows you to control home appliance from anywhere. Blynk provides very good and attractive interface.
Hi guys, this is me Rohan Barnwal in this project I teach you how you can create a device which help us in stop spreading of Corona Virus
Hi, my name is Rohan Barnwal welcome back in this project I teach you how you can create a device which help us in stop spreading of Corona
Make your own GPS tracker that works without wifi using GSM/GPRS connectivity. We do also have SMS and call feature
This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device
HealthEcos - An ecosystem for realtime monitoring of health data and detection of the symptoms related to COVID-19 and medication management
Hi guys it's me Rohan Barnwal welcome back with another project in this project I teach you how to create notification based door bell
It is an IOT based door lock system which consists of a NodeMCU board. It is interfaced with a Sg90 which shows open and close of a door lock
Stay safe with the smart tag that reminds you to wear a face mask when you'll go outside and sanitize yourself upon returning home.
This Preventive measure reduces the spread of infection to a large extent. A Must Watch!
In this tutorial, we will learn how to interface Servo motor with the Raspberry pi module and operate it with the Blynk app. and This proje
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
In this tutorial, I am going to show you how to read multiple analog values using only one analog input pin.
This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.
To assist the doctors to track their patients during COVID-19