Automatic and smart care of plants by proper watering and their monitoring.
Using PSoC and LinkIt ONE send analog sensor values to Blynk and then, with the power of IFTTT control your smart devices based on the data!
Save water, save energy and monitor water consumption with a smart faucet.
Sending The Data From The LoRa Modules To Blynk Servers Using Ai-Thinker LoRa Modules
A solution to measure noise level and sound pollution in urban areas.
Control temperature, humidity, CO2, and light with an automated open-source mushroom fruiting chamber using ESP32 and Blynk 2.0.
In this project, you can view the temperature and humidity in your room wherever you are.
Collect environmental factors and culture amount while producing yogurt. Then, run a neural network model via Blynk to predict its texture.
The robot car is operating with Nodemcu esp32 controller and the command is given by the Blynk android application in a mobile phone using t
In this tutorial you will learn how to set up a weather station based on ESP32, and how to monitor its readings remotely, via the Blynk app.
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
A monitoring station for my off-grid greenhouse. Multiple environmental parameters, WiFi, solar-powered, cloud connectivity.
IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.
Micro Gear Motor based small robot powered by a Wemos D32 Pro and controlled by Blynk app.
A new way to connect sensors! Connect up to five sensors to the particle powered WiSor and obtain real-time data on your mobile phone!
If you have ever wondered how to get started in the IoT (Internet of Things) world, this is the tutorial for you!
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
A smart scarecrow on the field to keep a track of climatic condition. For need of irrigation/pesticides a drone will be sent to the field.
Make an affordable but smart Alarm system for your home, or any of your buildings. It can run up to 2 years just from batteries.
Make IoT-based Home Automation using ESP32 Blynk with the Fan Speed control, sensor, and IR remote control relay with real-time feedback.
The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
We are going to build a simple IoT dog feeder that costs less than $30 and can be controlled remotely via an IoT software!
Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.
