Simple and full instruction for the beginner!
In this video I'm gong to show you how to make Esp8266 based IOT Car using your blynk IOT cloud platform
In this post we will be going to look how to make your own CCTV using ESP32-CAM board. It will be cost lower than CCTV cameras. You can fix
In Manual Mode, control the relay module from Touch Switch & Blynk App. In Auto Mode, DHT11 & LDR will control the Relays Automatically.
A smart scarecrow on the field to keep a track of climatic condition. For need of irrigation/pesticides a drone will be sent to the field.
Have your eggs always perfectly boiled just as you like them. With this solution that is simple and customizable.
Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen
Make an affordable but smart Alarm system for your home, or any of your buildings. It can run up to 2 years just from batteries.
Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
Control your heating with this simple device that is easy to modify. You can control your sunblinds or boiler for optimal temperature.
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
Make use of Samsung Gear Blynk widget to control LED strip that can light up your room. Thanks to HARDWARIO IoT kit it's easy to make.
In this tutorial, I am going to show you how to read multiple analog values using only one analog input pin.
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
Simple yet effective
Easy ways to build HCSR With BLYNK
Easy ways to make DHT With Blynk
Easy ways to make Servo with Blynk app