A simple project to learn IoT by connecting a DHT11 temperature and humidity sensor with WeMos D1 Mini and interfacing the data to Blynk.

Wanted to replace the standard remote control unit for a garage door with an app on my iPhone.

Create a shield of control with multiple sensors to create visual and sound notifications in case of danger.

Control home appliances over internet. This IOT project done using Node MCU ESP8266 and BLYNK app. Control devices from anywhere.

Solar installation with lithium battery packs monitoring.

Check the current conditions: light, temperature, humidity on your smartphone.

Open, close and monitor a garage door opener with a smart phone using a Particle Photon and the Blynk application.

Level Monitor for extremely dusty environments or where other distance sensors don’t work.

To assist the doctors to track their patients during COVID-19

This project can detect both possible and actual landslides, and send an alert to all those who are connected.

Real-time visibility and control of water, Nitrogen-Phosphorus-Potassium - from any where an Internet of Things (IoT) based system.

How can scientists model and predict the formation of sink holes using IoT?

In this project, I will show you how to make IoT based Pulse Oximeter using ESP32, MAX30100, and Blynk Application.

Fidget Spinners are everywhere - one of the challenges is to get the fastest spinning and longest running Spinner...build a sensor!

Cheap and easy way to feed the dog from anywhere via your phone.

This is a project for measuring the AC current of a device plugged into the outlet and data feedback using Blynk with OTA.

A system that keeps you updated about the happenings of your house in your absence.The display is shown on your mobile.

A cool RC Car that you can control with the touch of your fingers right from your own phone.

Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.

This is CDVR Robot - "Crowd Deterrent Vigilance Robot" to control Covid-19 situation

Used in a coffee roastery as part of a larger system, but can easily be adapted for control needs. A lot of control in a small form factor.

Getting started with Blynk Bridge - the simplest method to communicate between ESP8266, Arduino or Raspberry Pi.

An I2C interface with Blynk.

How to (and not to) build your own home automation system.