Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.

A monitoring station for my off-grid greenhouse. Multiple environmental parameters, WiFi, solar-powered, cloud connectivity.

In this easy project we'll connect a temperature and humidity sensor to an Arduino Uno with an Ethernet Shield and we'll use Blynk.

Control temperature, humidity, CO2, and light with an automated open-source mushroom fruiting chamber using ESP32 and Blynk 2.0.

Micro Gear Motor based small robot powered by a Wemos D32 Pro and controlled by Blynk app.

We show how to connect Pico to WiFi while maintaining low power and running it directly on AAA batteries.

A smart scarecrow on the field to keep a track of climatic condition. For need of irrigation/pesticides a drone will be sent to the field.

Monitor the surrounding dust and large particle (>0.5µm) for long time using Blynk IOT and plot the data for further research.

IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.

Automatic and smart care of plants by proper watering and their monitoring.

How to build a smart monitoring system (temperature, soil moisture, light level, humidity and air pressure sensors) for your plants.

Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.

This is a short tutorial for connecting and setting up the MH-Z14A carbon dioxide sensor in Arduino w/OTA updates and Blynk.

Use the Arduino101 Bluetooth wireless interface to read the Intertial Measurement Unit (IMU) with your phone or tablet using Blynk !

This tutorial will help you to learn DHT11/DHT22 interfacing with nodeMCU and sending its data to Blynk Application.

We will learn how to make a fire alarm system using NodeMCUESP8266. This IoT based project detects the nearby flame & informs us.

Using Ultrasonic sensor and Esp-32 to measure distance and obtaining result on blynk cloud.

Simple yet effective

Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.

Make IoT-based Home Automation using ESP32 Blynk with the Fan Speed control, sensor, and IR remote control relay with real-time feedback.

We are going to build a simple IoT dog feeder that costs less than $30 and can be controlled remotely via an IoT software!

The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.

Learn how to set up your own weather station, monitor environmental parameters and share your recordings with online community!

In this project, you can view the temperature and humidity in your room wherever you are.