A home automation project for light use with an ESP8266 and 5V relay.

Adjust your blinds from the comfort of your seat without having to go through the effort of standing up.

How to make a smart greenhouse using Arduino and Node MCU for IoT

This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.

A home automation and Internet of Things project using Arduino Mega 2560 and ESP32.

If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide

Control your home applications using Amazon Alexa.

Concerned about IoT privacy on the cloud? Blynk offers an interesting option for improved security with a local server.

This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.

Clean your yard from your smartphone or preset a job for AYSE to follow!

Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.

Get an extractor fan to automatically turn on when the humidity in the bathroom exceeded a certain level and then turn off again.

Remotely we control our home with MKR1000 and IOT of Blynk. We can manage the boiler, the 'anti-theft irrigation, open the Automatic Gate.

This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.

Real-time visibility and control of water, Nitrogen-Phosphorus-Potassium - from any where an Internet of Things (IoT) based system.

Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.

I made LED EyeBall controlled by Blynk using Adafruit Feather 32u4 Bluefruit LE. I can easily using Blynk!!

Get water meter data sent to your mobile phone using Wi-Fi. Made with ATtiny85 + ESP8266-01 + Blynk.cc and AA batteries.

In this I show you how to control LEDs using Blynk app In IoT platform.

Control your Home Lights using the Twitter platform.

In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.

Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.

Get notified on your smartphone/smartwatch when your mail is delivered and when it is collected. New version.

With this project, we will be able to water our plant automatically and monitor it from our smartphone.