Hi! Everyone. This time I show you on how to control your home appliances using your voice.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
This guide shows you how to add Blynk Board support to the Arduino IDE.
I created a raspberry pi remote-controlled car using Blynk.
How to make your room intelligent easily.
Many projects like this involve requiring a WiFi shield, or a Bluetooth Module. However, thanks to Blynk, all that is still possible.
It will start your water motor automatically and stop automatically. Also showing how much fill with water in cm.
Are you interested in controlling your robotic arm using your phone or computer from anywhere in the world?
This is a simple project to control a mini camera mount with your phone over WiFi.
A simple IoT experiment using an ESPectro Core v3 and connecting it to Blynk, Cayenne, Dweet, Freeboard & Thinger.
A first introduction to using Hover Labs Beam.
It is an IOT based door lock system which consists of a NodeMCU board. It is interfaced with a Sg90 which shows open and close of a door lock
It is a simple project that helpful for the advanced level of farming and irrigation.
When we press the button or touch the sensor, the temperature is displayed on 2 LCDs and Blynk mobile app.
This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.
A simple Internet of Things (IoT) experiment using an ESP32 Development Board & shared access Blynk.
You can control your home light or any appliances from anywhere and anyplace
On-board data acquisition for mountain bike air suspension pressures.
The best way to save electricity from using your light bulbs is to open your blinds and let the sun shine through!
A combination of 3 different clocks in one frame.
Many IoT based Home Automation projects crashes when the Internet speed goes down. So, within this project, I tried to solve this issue.
37 children die every year from being left inside of a hot car. The SafeTiBaby project hopes to fix that.
Control an LED brightness or color through Blynk App with ARMA IoT shield for Arduino Uno.
