At my age you have to get up at night and get tired on the way to the bathroom. Using a PIR-Sensor to trigger light on!
ADITI is a connected bodysuit heating enabled incubator for preterm infants measuring ECG, Heart Rate, SpO2, Temp & Respiration comfortably.
The idea is to upgrade my rover to be controlled by a Blynk app in my mobile. The Blynk is talking to my Arduino UNO using Bluetooth HC06.
An example of Blynk app linking the mobile to the Arduino 101 using Bluetooth Low Energy BLE.
Particle and Blynk to wirelessly monitor a 4,000 gallon water distribution system.
An opensource 3D printed aquarium controller with IOT capabilities.
A simple 4 channel design/program for monitoring orchid and plant moisture levels.
Wanted to replace the standard remote control unit for a garage door with an app on my iPhone.
Getting started with Blynk Bridge - the simplest method to communicate between ESP8266, Arduino or Raspberry Pi.
This project demonstrates how to use the various features of Blynk like Buttons, LED, LCD, Virtual Display with Onion Omega2p.
Temboo is very easy to automate the IoT with Arduno YUN, in combination with Blynk and Dropbox to store pictures. All is free and easy.
Control your favourite guitar effect using nothing but awesome guitar poses.
Use Blynk to send a command to Onion Omega2 and use virtual pins to write on your console.
A DHT11 connected to Blynk to read data
Use a LattePanda and Blynk to make a simple but cool IoT control unit.
Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.
Using PSoC and LinkIt ONE send analog sensor values to Blynk and then, with the power of IFTTT control your smart devices based on the data!
This is an ESP8266-based Neopixel dashboard: it can show current time, a custom message and have up to 41 preset effects.
50 people and 6 robots sumo at IoT meetup.
This system sends alerts to your smartphone when there is movement in the house, also allows monitoring the temperature of the place.
Controlling water and heat of a plantation, using real data as temperature, relative air humidity, and soil moisture.
Use your Android/IoS phone or tablet to control your hardware remotely with the thingSoC ESP32 board.
An I2C interface with Blynk.
Mars Rover that uses Arduino 101 for brains, BLE for communication, and the Blynk app for remote control.