It will start your water motor automatically and stop automatically. Also showing how much fill with water in cm.
Control any 5V element using Blynk and ☒CHIPS. This project sounds a Piezo Buzzer from my phone.
A first introduction to using Hover Labs Beam.
Converting a RC car to an IoT car with a Particle Photon and controlling it with the Blynk app.
A combination of 3 different clocks in one frame.
A simple Internet of Things (IoT) experiment using an ESP32 Development Board & shared access Blynk.
Control an LED brightness or color through Blynk App with ARMA IoT shield for Arduino Uno.
Using Google Assistant and Amazon Alexa, we can control our home's electronics gadgets (up to 240 v). Also with smartphone application.
On-board data acquisition for mountain bike air suspension pressures.
Make your stupid coffee grinder smart with this IoT and weight-based coffee grinder modification.
A simple IoT test using a Blynk project to control & monitor 2 ESP8266 boards (NodeMCU & Wemos D1).
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
This project uses Blynk (Esp8266), a 3-D printed hand, and two servos to make a remote controlled Halloween hand gag.
Are you interested in controlling your robotic arm using your phone or computer from anywhere in the world?
Yulee Rover is an Arduino Uno powered robot.
I think I have bitten off more than I can chew. I have no idea what I am doing. I am a smart person, I should be able to figure this out.
Using Arduino UNO GSM SIM800 SIM network to remotely control any Arduino with Blynk app. Share schematic + gerber file + BomList
37 children die every year from being left inside of a hot car. The SafeTiBaby project hopes to fix that.
In this tutorial you will learn how to set up a weather station based on ESP32, and how to monitor its readings remotely, via the Blynk app.
Learn how to use Blynk app with an ESP8266.
Have you bought a cheap analog LED strip set in the hardware store? Bring this set with a Particle Photon and a relay to light up!
How to use a SparkFun Blynk Board to create a wireless, battery-driven remote control for most digital cameras.
I created a house with a light that gradually turns on a light if it is dark and an alarm connected to the door.
The best way to save electricity from using your light bulbs is to open your blinds and let the sun shine through!