Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
This system will water your plants automatically, monitor the level of the water reservoir and will keep your plants happy on many aspects.
Build a home automation system with a Blynk user interface, an alarm system, dimmable lights, timers, and remote controlled appliances.
How to use a SparkFun Blynk Board to create a wireless, battery-driven remote control for most digital cameras.
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
This project uses Blynk (Esp8266), a 3-D printed hand, and two servos to make a remote controlled Halloween hand gag.
A new way to connect sensors! Connect up to five sensors to the particle powered WiSor and obtain real-time data on your mobile phone!
BLYNK app based remote used to control a bot.
The simplest project in Arduino that one could learn is to control the on-board LED via Blynk app.
The idea is to basically monitor our rooms continuously and if no one is present in the room, the system will turn off the lights and fans.
Cheap and easy way to feed the dog from anywhere via your phone.
Get an extractor fan to automatically turn on when the humidity in the bathroom exceeded a certain level and then turn off again.
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
Use the Arduino101 Bluetooth wireless interface with the Blynk GUI Library for control of things directly from your phone or tablet!
Want to pass something over to a friend without getting up? Lazy Ferrari is there to help you!
Control any 5V element using Blynk and ☒CHIPS. This project sounds a Piezo Buzzer from my phone.
This tutorial will take you step by step on how to use the Hologram GSM services with the RAK WisLTE module and Arduino IDE.
Analyse concrete, metal, wood structures for bends and angles and alerts if they have deviated from the original position.
This tutorial shows you how to use the RAK Creator pro and Dash button boards with the Blynk web services and app.
Monitor real power, voltage, current and power factor using the Sparkfun Blynk board and view live graphs in the Blynk App.
IoT-based project to control an indoor garden, monitor them remotely, and use the data for future analysis.
Converting a common RC car to a Bluetooth car, using an Arduino 101 & controlling with a smartphone via Blynk app.
Collecting multiple data from multiple sensors connected to the same 1-wire bus and monitoring them from the internet with Blynk.
Fidget Spinners are everywhere - one of the challenges is to get the fastest spinning and longest running Spinner...build a sensor!