A solution to measure noise level and sound pollution in urban areas.
Replace traditional radio control gear in a 3D Sets 3D-printed Jeep with a Wemos D1 mini, Blynk WiFi iPhone and Blynk local server-Rasp Pi.
BLYNK app based remote used to control a bot.
I spent my last weekend creating an app for my router. System and network charts, stats, notifications, WiFi control, and more!
Develop mobile application on BLYNK, and monitor temperature on your mobile.
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
Here's IoT project (Internet of Things) data monitor, without any Ethernet shield, ESP module or IoT board.
This is a simple project for those who want to make a relay module using one BC547 transistor.
This product is designed to monitoring the quality of air continuously for COPD patient.
In this project, I am going to demonstrate how you can turn on/off LED on idIoTware shield with the help of Blynk app.
Learn how to get started with the Sparkfun Blynk Board (SBB) and connect it to the internet.
This is the next step with an Particle Photon and softAP integration: cucumbers go online.
I made train controlled by Blynk and BLE board. I can easily using Blynk!!
Use of a Particle Argon to open/close a garage door with a Particle Xenon used as a mesh limit switch & smartphone control via Blynk app.
This is an ESP8266-based Neopixel dashboard: it can show current time, a custom message and have up to 41 preset effects.
How to build a smart monitoring system (temperature, soil moisture, light level, humidity and air pressure sensors) for your plants.
The aim of this project is to control and monitor our home appliances through the internet from anywhere in the world.
This project shows you how to change an ordinary remote control car to a Bluetooth control car with a Wombatics SAM01 Arduino board.
Measures tVOCs (Total Volatile Organic Compounds) + eCO2, dust density even for small particles >0.5μm, temperature and relative humidity.
My vision of IoT medicine packaging.
This is a short tutorial for connecting and setting up the MH-Z14A carbon dioxide sensor in Arduino w/OTA updates and Blynk.
This project will show you how to adapt a SMARS bot for control with an iPhone accelerometers, Blynk, Wemos D1 Mini, over WiFi.
How to create your own small IoT project which can be operated remotely.
A new way to connect sensors! Connect up to five sensors to the particle powered WiSor and obtain real-time data on your mobile phone!