In this tutorial, I am going to show you how to read multiple analog values using only one analog input pin.
This project was part of the Lane Tech HS Physical Computing. This project involves relays, and the app Blynk to control lights.
Learn how to set up your own weather station, monitor environmental parameters and share your recordings with online community!
It is an IOT based door lock system which consists of a NodeMCU board. It is interfaced with a Sg90 which shows open and close of a door lock
Fun activity for kids - let's learn how IoT can contribute to energy efficiency of a house!
Fun activity for students - set up your weather station, sent it up in the air, and monitor the recordings!
A simple home automation project allows you to control home appliance from anywhere. Blynk provides very good and attractive interface.
My colleague crashed the roof of his car by leaving the garage to early. So I promised him red, amber, green lights in the garage.
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
This Preventive measure reduces the spread of infection to a large extent. A Must Watch!
A clock and decorative RGB Led Matrix Colorduino Shield and NodeMCU v3 Board with i2C communication and Blynk for IOTable
HealthEcos - An ecosystem for realtime monitoring of health data and detection of the symptoms related to COVID-19 and medication management
Fun way to introduce kids to circuitry and electronic prototyping and to explain them importance of energy saving!
A simple project to receive message on NodeMCU through LoRa and display it on a Blynk app.
This tutorial is about making a temperature and humidity wifi node with Blynk.
Stay safe with the smart tag that reminds you to wear a face mask when you'll go outside and sanitize yourself upon returning home.
Hi guys it's me Rohan Barnwal welcome back with another project in this project I teach you how to create notification based door bell
Make your own GPS tracker that works without wifi using GSM/GPRS connectivity. We do also have SMS and call feature
In this easy project we'll connect a temperature and humidity sensor to an Arduino Uno with an Ethernet Shield and we'll use Blynk.
Coding is so FUN! you can make a smart parking in your house!
In this tutorial, we will learn how to interface Servo motor with the Raspberry pi module and operate it with the Blynk app. and This proje
This project aimed at designing and fabricating a highly reliable, user-friendly device.
Coding is so FUN! You can make RFID Reader to lock/unlock your SECRET ROOM!
Hi, my name is Rohan Barnwal welcome back in this project I teach you how you can create a device which help us in stop spreading of Corona