Want to pass something over to a friend without getting up? Lazy Ferrari is there to help you!
Control any 5V element using Blynk and ☒CHIPS. This project sounds a Piezo Buzzer from my phone.
This tutorial will take you step by step on how to use the Hologram GSM services with the RAK WisLTE module and Arduino IDE.
Analyse concrete, metal, wood structures for bends and angles and alerts if they have deviated from the original position.
This tutorial shows you how to use the RAK Creator pro and Dash button boards with the Blynk web services and app.
Monitor real power, voltage, current and power factor using the Sparkfun Blynk board and view live graphs in the Blynk App.
IoT-based project to control an indoor garden, monitor them remotely, and use the data for future analysis.
Converting a common RC car to a Bluetooth car, using an Arduino 101 & controlling with a smartphone via Blynk app.
Collecting multiple data from multiple sensors connected to the same 1-wire bus and monitoring them from the internet with Blynk.
Fidget Spinners are everywhere - one of the challenges is to get the fastest spinning and longest running Spinner...build a sensor!
Use the Arduino101 Bluetooth wireless interface to read the Intertial Measurement Unit (IMU) with your phone or tablet using Blynk !
Controlling water and heat of a plantation, using real data as temperature, relative air humidity, and soil moisture.
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
Display sensor values (DHT11 in example) on the Smartphone using Blynk App.
I've made a few smoker controllers in the past and monitoring tools to go with them.
Water is essential for life. Save water is saving Earth. So, why not use Blynk Board to save Earth?
farmMinder monitors soil moisture level and scares away squirrels! Using the Blynk platform, you can monitor your farm remotely.
Save time by knowing whether the Faculty is in his chamber or not.
An internet-connected, servo-driven deadbolt actuator that can be operated remotely using a smartphone.
The Waternator 293 is a simple device that regulates the water level in your Christmas tree base.
Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.
A monitoring system that records temperature and motion of a baby while sleeping. Notifications sent to phone and secondary photon.
Control home appliances over internet. This IOT project done using Node MCU ESP8266 and BLYNK app. Control devices from anywhere.
Check the current conditions: light, temperature, humidity on your smartphone.