Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
Read temperature, humidity and air quality control using DHT22 and MQ - 135 and monitoring with Blynk using ESP8266.
LM35 data or temperature can be shown on phone from anywhere. An Example of how can we read data through the virtual pin.
Monitor real power, voltage, current and power factor using the Sparkfun Blynk board and view live graphs in the Blynk App.
The Waternator 293 is a simple device that regulates the water level in your Christmas tree base.
Control your Home Lights using the Twitter platform.
The idea is to upgrade my rover to be controlled by a Blynk app in my mobile. The Blynk is talking to my Arduino UNO using Bluetooth HC06.
Really? A pitch? What is this?
Add some sound FX to your electric fireplace!
Use your Android/IoS phone or tablet to control your hardware remotely with the thingSoC ESP32 board.
Use the Blynk app to control the RGB LED, the onboard LED, and the LED expansion from your phone.
This project shows you how to change an ordinary remote control car to a Bluetooth control car with a Wombatics SAM01 Arduino board.
In this tutorial we're going to learn how to use Blynk app & Arduino in order to control a lamp; the combination will be through USB serial.
I made remote control car. The motors are controlled by smartphone application Blynk and Pi Zero W with the I2C input motor driver.
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
The simplest project in Arduino that one could learn is to control the on-board LED via Blynk app.
In this article, we will introduce you to controlling real world devices using the Blynk system.
Weather station that display temperature, humidity and pressure on your Android phone with Blynk IoT server.
I made a Blynk-controlled mini car using M5Stick-C. Pretty good!
Clean your yard from your smartphone or preset a job for AYSE to follow!
Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.
This WiFi module makes it convenient for the user to switch between two audio sources without the need to swap and insert the audio cables.
Display information or variables on a LCD available at BLYNK app using IOT.
The ARMA IoT Shield is a breakout board for Arduino to make IoT projects quickly.