Use of a Particle Argon to open/close a garage door with a Particle Xenon used as a mesh limit switch & smartphone control via Blynk app.

If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide

A simple device that turns the lights on when the user approaches home.

Control and monitor the home environment using Android app with advanced features such as voice command, scheduling, home preparing itself.

This health band can assist old people in their daily lives, leaving the family stress free!

Smart Garden is a plant environmental monitoring system.

In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!

Use the Ionic framework to build an app that can control your hardware or hit any REST API.

A lamp which changes color according to the tweets of people.

Octopod, a uniquely shaped full automation system that allows you to monitor your industry and keep security with AI and smart RFID locks.

A project that displays the temperature and humidity of a room on your mobile in real time.

Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.

Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.

Connecting an electrical bulb with Arduino Uno and accessing it from Android Phone.

A system that warns for unexpected rains to help out your garden. The system displays real time values on mobile.

Neopixel LEDs are fitted behind the guitar pickups and illuminate with the rhythm of your strumming allowing for a custom and unique design.

Get notified on your smartphone/smartwatch when your mail is delivered and when it is collected. New version.

Remotely we control our home with MKR1000 and IOT of Blynk. We can manage the boiler, the 'anti-theft irrigation, open the Automatic Gate.

A IoT system which helps you control your home lights from anywhere in the world in real time.

This is a unit to control a central heating system via 433MHz radio signals. Control of heating is via a Blynk app.

This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.

This NeoPixel LED light has six different light settings, is connected to the Wi-Fi and controlled via Particle Photon and Blynk app.

Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!

Control and monitor your Arduino porject using your only a smartphone and an internet connection!