Build an Android or iOS app for your hardware with no coding!
Create your Blynk mobile app to monitor your garden and activate the irrigation.
Octopod, a uniquely shaped full automation system that allows you to monitor your industry and keep security with AI and smart RFID locks.
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
Controlling water and heat of a plantation, using real data as temperature, relative air humidity, and soil moisture.
A project that speaks on behalf of mother nature. It is real time air quality monitoring device.
Collecting multiple data from multiple sensors connected to the same 1-wire bus and monitoring them from the internet with Blynk.
This is a short tutorial for connecting and setting up the MH-Z14A carbon dioxide sensor in Arduino w/OTA updates and Blynk.
Display sensor values (DHT11 in example) on the Smartphone using Blynk App.
We show how to connect Pico to WiFi while maintaining low power and running it directly on AAA batteries.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
Monitor your blood oxygen level with this ESP32 based Oximeter. This Oximeter costs less than 10$.
In this easy project we'll connect a temperature and humidity sensor to an Arduino Uno with an Ethernet Shield and we'll use Blynk.
Monitor the surrounding dust and large particle (>0.5µm) for long time using Blynk IOT and plot the data for further research.
Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.
An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!
Know when your clothes are dry
This tutorial will help you to learn DHT11/DHT22 interfacing with nodeMCU and sending its data to Blynk Application.
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
We will learn how to make a fire alarm system using NodeMCUESP8266. This IoT based project detects the nearby flame & informs us.
How to build a smart monitoring system (temperature, soil moisture, light level, humidity and air pressure sensors) for your plants.
Simple yet effective
Use the Arduino101 Bluetooth wireless interface to read the Intertial Measurement Unit (IMU) with your phone or tablet using Blynk !