Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
A four-legged robot on roller skates.
Learn how to set up your own weather station, monitor environmental parameters and share your recordings with online community!
In this tutorial you will learn how to set up a weather station based on ESP32, and how to monitor its readings remotely, via the Blynk app.
Fun activity for students - set up your weather station, sent it up in the air, and monitor the recordings!
Fun activity for kids - let's learn how IoT can contribute to energy efficiency of a house!
Fun way to introduce kids to circuitry and electronic prototyping and to explain them importance of energy saving!
In this project, you can view the temperature and humidity in your room wherever you are.
An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
5 DOF robotic arm using an Arduino Yun, Blynk app as the control interface and Matlab to implement the forward kinematics.
We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
This is a short tutorial for connecting and setting up the MH-Z14A carbon dioxide sensor in Arduino w/OTA updates and Blynk.
Make a simplified table trash bin and can.
A smartwatch with fall and location detection, reminders and more, designed to help you or your loved one with Alzheimer's!
This WiFi module makes it convenient for the user to switch between two audio sources without the need to swap and insert the audio cables.
An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.
My aim is to minimize the loss of electricity there is when people forget to switch off their fans or lights, through smart home solution.
This project will show you how to adapt a SMARS bot for control with an iPhone accelerometers, Blynk, Wemos D1 Mini, over WiFi.
A new iteration of my original device called Crawler. It creeps around and avoids things. Enough said. :-)
This is a tutorial to show you how to connect to Blynk using an ESP8266 - 01 as an Arduino Uno wifi shield.
Have your eggs always perfectly boiled just as you like them. With this solution that is simple and customizable.
Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen
Make an affordable but smart Alarm system for your home, or any of your buildings. It can run up to 2 years just from batteries.
Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.