This is a short tutorial for connecting and setting up the MH-Z14A carbon dioxide sensor in Arduino w/OTA updates and Blynk.
Build an Android or iOS app for your hardware with no coding!
Smart Garden is a plant environmental monitoring system.
A project that speaks on behalf of mother nature. It is real time air quality monitoring device.
Controlling water and heat of a plantation, using real data as temperature, relative air humidity, and soil moisture.
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
Octopod, a uniquely shaped full automation system that allows you to monitor your industry and keep security with AI and smart RFID locks.
saving water smartly.
A system that warns for unexpected rains to help out your garden. The system displays real time values on mobile.
A cube with all the necessary sensors, suitable for a wide range of applications like agriculture. Know the land beneath you!
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
Know when your clothes are dry
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!
Save time by knowing whether the Faculty is in his chamber or not.
How can scientists model and predict the formation of sink holes using IoT?
Fidget Spinners are everywhere - one of the challenges is to get the fastest spinning and longest running Spinner...build a sensor!
An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.
Create your Blynk mobile app to monitor your garden and activate the irrigation.
Display sensor values (DHT11 in example) on the Smartphone using Blynk App.
Collecting multiple data from multiple sensors connected to the same 1-wire bus and monitoring them from the internet with Blynk.
A simple 4 channel design/program for monitoring orchid and plant moisture levels.
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
Monitor pressure, humidity, and temperature over WiFi with an AA battery-sized device.