We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.
An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
5 DOF robotic arm using an Arduino Yun, Blynk app as the control interface and Matlab to implement the forward kinematics.
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
An outdoor rover, capable of autonomous navigation (using GPS and sonar sensors) or controlled over WiFi.
Check in on a loved one instantly and have fun!
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
This is a robot who can see, listen, talk, and move freely to help us do many activities, much like a friend.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
Clean your yard from your smartphone or preset a job for AYSE to follow!
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
Controlling a robot via WiFi, using Arduino and Blynk application.
Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.
I wanted to make a robot. However, I could only make a foot because my money ran out.
This is a very simple project, were the main idea is to explore how to control servos via internet using NodeMCU and Blynk.
This is CDVR Robot - "Crowd Deterrent Vigilance Robot" to control Covid-19 situation
This project uses Blynk (Esp8266), a 3-D printed hand, and two servos to make a remote controlled Halloween hand gag.
CaRo is a cable robot that enables easy and cost-effective entry into programming and robotics.
This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device
Hi! Everyone. This time I show you on how to control your home appliances using your voice.
Human detection Security System Using IOT
MovingLight is a moveable NeoPixel LED light with two stepper motors and is controlled via Bluetooth and Blynk app.