Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.

In this project, you can view the temperature and humidity in your room wherever you are.

Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.

You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.

Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.

With this project you can play any sound from your SD card on your audio system. Only wire you will need is 3.5mm jack.

Create a beautiful home lamp that looks great and also is smart and customizable with HARDWARIO IoT Kit. It is really easy to make.

I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.

Make use of Samsung Gear Blynk widget to control LED strip that can light up your room. Thanks to HARDWARIO IoT kit it's easy to make.

Use of a Particle Argon to open/close a garage door with a Particle Xenon used as a mesh limit switch & smartphone control via Blynk app.

If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide

Using Arduino UNO GSM SIM800 SIM network to remotely control any Arduino with Blynk app. Share schematic + gerber file + BomList

Control an on-board LED.

The aim of this project is to control and monitor our home appliances through the internet from anywhere in the world.

This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.

An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.

With this project, we will be able to water our plant automatically and monitor it from our smartphone.

Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.

A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt

Make a simplified table trash bin and can.

A home automation and Internet of Things project using Arduino Mega 2560 and ESP32.

LM35 data or temperature can be shown on phone from anywhere. An Example of how can we read data through the virtual pin.

Control your home applications using Amazon Alexa.

Control your home applications using a mobile phone.