Dealing with ill people or elderly at your home? No problem, here's the solution.

Control your favourite guitar effect using nothing but awesome guitar poses.

Using an accelerometer, we detected angular acceleration. With this data we used a particle photon to notify the user via a Blynk dashboard.

A smartphone garage door remote and status sensor using Blynk and Photon.

Remind the elderly to take pills through a Google Calendar.

The aim of this project is to control and monitor our home appliances through the internet from anywhere in the world.

I modified a Blynk-controlled car using Adafruit Feather 32u4 Bluefruit LE. I used the Accelerometer widget of Blynk.

A lock which allows remote locking and un-locking. An user does not need to walk to the door to open or lock a door.

How to make a functional application with Blynk and the Linkit Smart 7688 Duo board, with utility for home automation.

Sending The Data From The LoRa Modules To Blynk Servers Using Ai-Thinker LoRa Modules

The autonomous device will send the vehicle position to the android app with time and will show the location on google maps.

This project is dedicated to my parents, but you can also use it for surprise events for someone special.

Make an IoT-based Smart Home with Blynk 2.0 using ESP32 to control 8 home appliances with real-time feedback & No Wi-Fi control.

Make your own GPS tracker that works without wifi using GSM/GPRS connectivity. We do also have SMS and call feature

Converting a RC car to an IoT car with a Particle Photon and controlling it with the Blynk app.

Make IoT-based Smart Home Automation using Multiple ESP32 NodeMCU ESP8266 networks to control all the home appliances with Blynk & Switches.

50 people and 6 robots sumo at IoT meetup.

The Water Leak Detector can monitor two specific locations for the presence of water and notify you via a local alarm or smartphone app.

Here's IoT project (Internet of Things) data monitor, without any Ethernet shield, ESP module or IoT board.

This tutorial is for making DIY automated driveway gates for relatively cheap using Arduino, ESP8266, Raspberry Pi, and Blynk!

A solution to measure noise level and sound pollution in urban areas.

Make IoT-based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the IR Remote, manual switch & Wi-Fi.

In this project, we are going to learn how to use Blynk app and Raspberry Pi 3 in order to control home appliance (Coffee maker,Lamp...).

Check the temperature and humidity of your house, the outside conditions and the weather forecast for today from your phone!