A simple project to receive message on NodeMCU through LoRa and display it on a Blynk app.

Real-time workstation display of all patients in an intensive care unit. Real-time feedback to doctor's phone and concept of smart ambulance

Hi! Everyone. This time I show you on how to control your home appliances using your voice.

study and observer environment with this rover

A clock and decorative RGB Led Matrix Colorduino Shield and NodeMCU v3 Board with i2C communication and Blynk for IOTable

We will learn how to make a fire alarm system using NodeMCUESP8266. This IoT based project detects the nearby flame & informs us.

This tutorial shows how to flash firmware on the ESP8266-01. Also how to connect the ESP8266-01/Arduino to Blynk.

My colleague crashed the roof of his car by leaving the garage to early. So I promised him red, amber, green lights in the garage.

A simple 4 channel design/program for monitoring orchid and plant moisture levels.

IOT application with MKR1000 and ENV shield just 2 components with them we can get (Temp, Lux, Hum, UV) values from everywhere

The main of purpose of my project, it works a message to send to you. You get some information of fire danger and gas in your home.

An LED that will be on or off, using a button from Blynk.

The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.

Save water, save energy and monitor water consumption with a smart faucet.

It is a simple project that helpful for the advanced level of farming and irrigation.

Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.

A four-legged robot on roller skates.

Learn how to set up your own weather station, monitor environmental parameters and share your recordings with online community!

Fun activity for kids - let's learn how IoT can contribute to energy efficiency of a house!

In this project, you can view the temperature and humidity in your room wherever you are.

5 DOF robotic arm using an Arduino Yun, Blynk app as the control interface and Matlab to implement the forward kinematics.

A new iteration of my original device called Crawler. It creeps around and avoids things. Enough said. :-)

Check the temperature and humidity of your house, the outside conditions and the weather forecast for today from your phone!

Use of a Particle Argon to open/close a garage door with a Particle Xenon used as a mesh limit switch & smartphone control via Blynk app.