The Waternator 293 is a simple device that regulates the water level in your Christmas tree base.
Converting a common RC car to a Bluetooth car, using an Arduino 101 & controlling with a smartphone via Blynk app.
Particle and Blynk to wirelessly monitor a 4,000 gallon water distribution system.
An opensource 3D printed aquarium controller with IOT capabilities.
A simple 4 channel design/program for monitoring orchid and plant moisture levels.
Getting started with Blynk Bridge - the simplest method to communicate between ESP8266, Arduino or Raspberry Pi.
Control your favourite guitar effect using nothing but awesome guitar poses.
A DHT11 connected to Blynk to read data
Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.
50 people and 6 robots sumo at IoT meetup.
Controlling water and heat of a plantation, using real data as temperature, relative air humidity, and soil moisture.
Use your Android/IoS phone or tablet to control your hardware remotely with the thingSoC ESP32 board.
Mars Rover that uses Arduino 101 for brains, BLE for communication, and the Blynk app for remote control.
I modified a Blynk-controlled car using Adafruit Feather 32u4 Bluefruit LE. I used the Accelerometer widget of Blynk.
This project is dedicated to my parents, but you can also use it for surprise events for someone special.
Building robots shouldn't be hard or laborious. All you need is an Arduino 101 and a Sparkfun chassis.
My vision of IoT medicine packaging.
A system that allows you to detect movement, send alert through your smartphone and turn on and off the lights of your home over internet!
5 DOF robotic arm using an Arduino Yun, Blynk app as the control interface and Matlab to implement the forward kinematics.
Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.
Take care of your plant with automatic watering.
A cool star decoration for Chritmas Trees powered by Arduino MKR1000
A shiny, shaky and glowy ornament that can be scaled to go on top of your tree.
When we press the button or touch the sensor, the temperature is displayed on 2 LCDs and Blynk mobile app.