Make an ESP01 Project using Blynk IFTTT to control a 2-channel relay module with the Google Assistant. (Circuit + Source Code)

The autonomous device will send the vehicle position to the android app with time and will show the location on google maps.

Save water, save energy and monitor water consumption with a smart faucet.

Sending The Data From The LoRa Modules To Blynk Servers Using Ai-Thinker LoRa Modules

The Water Leak Detector can monitor two specific locations for the presence of water and notify you via a local alarm or smartphone app.

A solution to measure noise level and sound pollution in urban areas.

Make an IoT-based Smart Home with Blynk 2.0 using ESP32 to control 8 home appliances with real-time feedback & No Wi-Fi control.

A method in which waste management is automated. An innovative system that will help keep the city clean and healthy.

Converting a RC car to an IoT car with a Particle Photon and controlling it with the Blynk app.

Make your own GPS tracker that works without wifi using GSM/GPRS connectivity. We do also have SMS and call feature

This tutorial is for making DIY automated driveway gates for relatively cheap using Arduino, ESP8266, Raspberry Pi, and Blynk!

In this project, you can view the temperature and humidity in your room wherever you are.

Check the temperature and humidity of your house, the outside conditions and the weather forecast for today from your phone!

Control temperature, humidity, CO2, and light with an automated open-source mushroom fruiting chamber using ESP32 and Blynk 2.0.

I bought a GE smart outlet because it was on sale @Lowes really cheap. Well their app stinks and its not HomeKit compatible. I fixed that!

A system for the blind which helps them walk through the street, as and also monitors their location and sends an SOS on button press.

Make IoT-based Smart Home Automation using Multiple ESP32 NodeMCU ESP8266 networks to control all the home appliances with Blynk & Switches.

In this project, I am going to demonstrate how you can turn on/off LED on idIoTware shield with the help of Blynk app.

Make IoT-based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the IR Remote, manual switch & Wi-Fi.

Check the RF sockets with Blynk app!

A monitoring station for my off-grid greenhouse. Multiple environmental parameters, WiFi, solar-powered, cloud connectivity.

How to make an IOT Weather Reporting System using Arduino and Node MCU

Are you interested in controlling your robotic arm using your phone or computer from anywhere in the world?

IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.