How to make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback.
Stay safe with the smart tag that reminds you to wear a face mask when you'll go outside and sanitize yourself upon returning home.
Make an ESP01 Project using Blynk IFTTT to control a 2-channel relay module with the Google Assistant. (Circuit + Source Code)
The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.
Make IoT-based Home Automation using ESP32 Blynk with the Fan Speed control, sensor, and IR remote control relay with real-time feedback.
In the Lora IoT project tutorial, I have shown how to make the LoRa Arduino ESP8266 control relay from the Blynk IoT platform with feedback.
Seeed MR60BHA1: Sense presence, breathing, and heartbeat with mmWave precision. Non-contact, low-power, and compact for smart homes, health
Integrating Blynk to a WiFi MESH network for Lifstyle Property monitoring and control of various mission critical assets.
Make an IoT-based Smart Home with Blynk 2.0 using ESP32 to control 8 home appliances with real-time feedback & No Wi-Fi control.
The project is to provide a wearable monitoring system for sewage workers to monitor them while working in the sewage.
A clock and decorative RGB Led Matrix Colorduino Shield and NodeMCU v3 Board with i2C communication and Blynk for IOTable
The idea is to basically monitor our rooms continuously and if no one is present in the room, the system will turn off the lights and fans.
The bird house will be outfitted with IOT to track what kind of conditions attracts guests and will tweet you when they are at the door!
Based on sensor data open/close window via actuator and turn on/off fans. App via Blynk platform. Entirely solar powered.
Manually & Remotely Controlled home-automation system using blynk 2.0 and SMT Smart home-automation pcb.
How to create your own small IoT project which can be operated remotely.
A tutorial for the new Blynk using the MKR 1000 connected over Wi-Fi.
Use of a Particle Argon to open/close a garage door with a Particle Xenon used as a mesh limit switch & smartphone control via Blynk app.
In this tutorial, I am going to show you how to read multiple analog values using only one analog input pin.
When a print is complete, the printer will push a button and send a notification to the mobile phone.
IOT Controlled 4Bit NeoPixel Desk lamp is operated using the very simple Blynk platform and Esp8266 based nodemcu.
This project controls the power going through an extension cord into a lamp using surrounding light.
Fun activity for kids - let's learn how IoT can contribute to energy efficiency of a house!
Converting a RC car to an IoT car with a Particle Photon and controlling it with the Blynk app.