Learn how to use Blynk.
This project controls the power going through an extension cord into a lamp using surrounding light.
Make an affordable but smart Alarm system for your home, or any of your buildings. It can run up to 2 years just from batteries.
Learn how to use Blynk app with an ESP8266.
Hi im new
Stay safe with the smart tag that reminds you to wear a face mask when you'll go outside and sanitize yourself upon returning home.
Have you ever dreamed to turn on or off your Christmas tree lights with just your voice? if the answer is "yes", just read this article.
Turn a light on/off using a relay, Blynk, and an IR Break Beam.
The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
SuperWear is one-of-a-kind and seamless approach that enables an individual to utilize technology for healthcare and daily lifestyle.
Get alerted about your grain bin overflowing- before it happens.
Smart step counter shoe using ESP8266, Infrared Sensor and a LiPo battery.
IOT Controlled 4Bit NeoPixel Desk lamp is operated using the very simple Blynk platform and Esp8266 based nodemcu.
Fun activity for kids - let's learn how IoT can contribute to energy efficiency of a house!
This project was part of the Lane Tech HS Physical Computing. This project involves relays, and the app Blynk to control lights.
In this Internet of Things project, I have shown how to make the IoT-based water pump controller using ESP32 Blynk & float sensor switches.
The project is to provide a wearable monitoring system for sewage workers to monitor them while working in the sewage.
When a print is complete, the printer will push a button and send a notification to the mobile phone.
Based on sensor data open/close window via actuator and turn on/off fans. App via Blynk platform. Entirely solar powered.
Control and Monitor your ESP32 Dev Board with the Blynk IoT Cloud. Guide for Blynk 1.0 (legacy) and Blynk 2.0 API uses
Using Ultrasonic sensor and Esp-32 to measure distance and obtaining result on blynk cloud.
Home-automation system using 8 Node PCB & Blynk 2.0
A small device for controlling RGB strips over the internet. The system is based on the NodeMCU using Blynk for remote control.