Mr. Big is a large mobile unit that can carry weight up to 8kg.
Main Door Security System with keypad and MLX90614. LEDs are operated by 3 modes (manually + IR + Blynk) & a water level indicator system.
Building robots shouldn't be hard or laborious. All you need is an Arduino 101 and a Sparkfun chassis.
Use the popular Blynk app to control and change the state of your IoT Cloud Kit through your smartphone.
In this tutorial, I am going to show you how to read multiple analog values using only one analog input pin.
This a multi sensor project where we will interface flame sensor and MQ2 gas sensor with ESP8266 NodeMCU.
A tutorial on how to use the most important element of blynk.
IOT Controlled 4Bit NeoPixel Desk lamp is operated using the very simple Blynk platform and Esp8266 based nodemcu.
In this opportunity we will integrate our active power meter or electric consumption, Peacefair Pzem-004 with the IoT Blynk app platform
Control 8 relays with WiFI + Bluetooth + Manual Switch using ESP32 and Blynk App. Explained with circuit & source code.
Getting started with Blynk Bridge - the simplest method to communicate between ESP8266, Arduino or Raspberry Pi.
How to make IoT based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the manual switch & smartphone.
A tutorial for the new Blynk using the MKR 1000 connected over Wi-Fi.
In this IoT project, I have made a WiFi and IR remote control relay module using an ESP8266 (ESP01) and Arduino with Real-time Feedback.
Mars Rover that uses Arduino 101 for brains, BLE for communication, and the Blynk app for remote control.
I wanted to create a device that could spin spools of thread when I pressed a button so I could just cut the thread and continue sewing.
An opensource 3D printed aquarium controller with IOT capabilities.
A four-legged robot on roller skates.
How to make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback.
How to (and not to) build your own home automation system.
LM35 data or temperature can be shown on phone from anywhere. An Example of how can we read data through the virtual pin.
In this project, I will show you how to make IoT based Pulse Oximeter using ESP32, MAX30100, and Blynk Application.
A simple 4 channel design/program for monitoring orchid and plant moisture levels.
This project shows you how to change an ordinary remote control car to a Bluetooth control car with a Wombatics SAM01 Arduino board.
