We will learn how to make a fire alarm system using NodeMCUESP8266. This IoT based project detects the nearby flame & informs us.
This tutorial shows how to flash firmware on the ESP8266-01. Also how to connect the ESP8266-01/Arduino to Blynk.
My colleague crashed the roof of his car by leaving the garage to early. So I promised him red, amber, green lights in the garage.
A simple 4 channel design/program for monitoring orchid and plant moisture levels.
IOT application with MKR1000 and ENV shield just 2 components with them we can get (Temp, Lux, Hum, UV) values from everywhere
The main of purpose of my project, it works a message to send to you. You get some information of fire danger and gas in your home.
An LED that will be on or off, using a button from Blynk.
A DHT11 connected to Blynk to read data
The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.
It is a simple project that helpful for the advanced level of farming and irrigation.
Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
A four-legged robot on roller skates.
Learn how to set up your own weather station, monitor environmental parameters and share your recordings with online community!
Fun activity for kids - let's learn how IoT can contribute to energy efficiency of a house!
In this project, you can view the temperature and humidity in your room wherever you are.
5 DOF robotic arm using an Arduino Yun, Blynk app as the control interface and Matlab to implement the forward kinematics.
A new iteration of my original device called Crawler. It creeps around and avoids things. Enough said. :-)
This is a tutorial to show you how to connect to Blynk using an ESP8266 - 01 as an Arduino Uno wifi shield.
Use of a Particle Argon to open/close a garage door with a Particle Xenon used as a mesh limit switch & smartphone control via Blynk app.
Control and monitor the home environment using Android app with advanced features such as voice command, scheduling, home preparing itself.
Using a BeagleBone Black, you can create a custom smart mirror to keep you up to date and on track in the mornings when getting ready.
Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.
50 people and 6 robots sumo at IoT meetup.
Getting started with Blynk Bridge - the simplest method to communicate between ESP8266, Arduino or Raspberry Pi.