An Alexa supported water level indicator that allows you to get status of your current water level in the tank by just asking Amazon Alexa

IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.

In this project, I will show you how to make IoT based Pulse Oximeter using ESP32, MAX30100, and Blynk Application.

This tutorial is for making DIY automated driveway gates for relatively cheap using Arduino, ESP8266, Raspberry Pi, and Blynk!

This tutorial shows how to ON/OFF Water pump with Magicbit(ESP32) and Blynk App.

This a multi sensor project where we will interface flame sensor and MQ2 gas sensor with ESP8266 NodeMCU.

This device is an IoT based door lock that can be controlled through the cloud from anywhere around the world on android as well as ios

An alert system that sends a notification to your mobile phone when anyone accesses the safe.

Monitoring basement to make sure humidity does not rise too high and alert to check if dehumidifier bucket is full.

How to make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback.

Automatic irrigation of 3 plants of Pothos, through the use of Wemos (ESP8266).

Hey guys!! How are you ? I am going to do here today is how to control our bike using a smartphone.

Remote control and data analysis of a compressor with the Blynk app and Google Sheets

Clever Globus where main source of light are LED's. All of them are changable and fully programable. It has thermometer and button for start

Here, I am explaining you How to Control your lights, fans or other things using Mobile Phone over Bluetooth. Come Let's See

Real-time visibility and control of water, Nitrogen-Phosphorus-Potassium - from any where an Internet of Things (IoT) based system.

Make IoT-based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the IR Remote, manual switch & Wi-Fi.

The project is to provide a wearable monitoring system for sewage workers to monitor them while working in the sewage.

Control LED using Bluetooth Module (HC05 & HC06) & using BLYNK app, you can control led using your mobile phone.

Control the position of a microphone stand remotely through Blynk.

A system that closes my closet door using a servo motor and an Particle Argon

Make IoT-based Smart Home Automation using Multiple ESP32 & NodeMCU network to control all the home appliances from the Switches & Blynk App

I wanted to create a device that could spin spools of thread when I pressed a button so I could just cut the thread and continue sewing.

Stopping my humidifier from working by drowning it via servo when it is no longer dark or when I want.