Make an IoT-based Smart Home with Blynk 2.0 using ESP32 to control 8 home appliances with real-time feedback & No Wi-Fi control.

Converting a RC car to an IoT car with a Particle Photon and controlling it with the Blynk app.

Make your own GPS tracker that works without wifi using GSM/GPRS connectivity. We do also have SMS and call feature

Check the temperature and humidity of your house, the outside conditions and the weather forecast for today from your phone!

Make IoT-based Smart Home Automation using Multiple ESP32 NodeMCU ESP8266 networks to control all the home appliances with Blynk & Switches.

A system for the blind which helps them walk through the street, as and also monitors their location and sends an SOS on button press.

Make IoT-based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the IR Remote, manual switch & Wi-Fi.

In this project, I am going to demonstrate how you can turn on/off LED on idIoTware shield with the help of Blynk app.

A monitoring station for my off-grid greenhouse. Multiple environmental parameters, WiFi, solar-powered, cloud connectivity.

IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.

Are you interested in controlling your robotic arm using your phone or computer from anywhere in the world?

Make use of Samsung Gear Blynk widget to control LED strip that can light up your room. Thanks to HARDWARIO IoT kit it's easy to make.

Hi! Everyone. This time I show you on how to control your home appliances using your voice.

A new way to connect sensors! Connect up to five sensors to the particle powered WiSor and obtain real-time data on your mobile phone!

A clock and decorative RGB Led Matrix Colorduino Shield and NodeMCU v3 Board with i2C communication and Blynk for IOTable

study and observer environment with this rover

Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.

My colleague crashed the roof of his car by leaving the garage to early. So I promised him red, amber, green lights in the garage.

Make IoT-based Home Automation using ESP32 Google Assistant Blynk with timer, sensor, and IR remote control relay with real-time feedback.

This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.

First step towards Home automation

Learn how to use Blynk.

Control your heating with this simple device that is easy to modify. You can control your sunblinds or boiler for optimal temperature.

This project controls the power going through an extension cord into a lamp using surrounding light.